Receiver/Dryer With Desiccant Bag, Replacing Without Need For Cleaning Refrigerant Circuit
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Pay attention to the general information for replacing components. Refer to GENERAL INFORMATION FOR REPLACING COMPONENTS .
- For example, no escape of refrigerant and no ingress of moisture and dirt into circuit.
-- Discharge the refrigerant circuit. Refer to WORKING WITH A/C SERVICE STATION .
-- Remove the receiver/dryer. Refer to Refrigerant Circuit (vehicle-specific Service Information).
-- Remove the dirt from the receiver/dryer.
-- Weight the removed receiver/dryer using the Digital Scale :VAS231007 .
-- Add refrigerant oil to the new receiver/dryer until it is the same weight as the receiver/dryer that was removed.
-- Install the new receiver/dryer. Refer to Refrigerant Circuit (vehicle-specific Service Information).
-- Assemble, evacuate and fill the refrigerant circuit. Refer to WORKING WITH A/C SERVICE STATION .