Wiring Harness Repair Set - Hot Air Blower:VAS 1978/14A

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hot Air Gun (VAS 1978/14)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

CAUTION:

When heat-shrinking crimp connections, be careful not to damage any other wiring, plastic parts or insulating material with the hot nozzle of the hot air gun.

Always observe operating instructions of heat gun.

The Wiring Harness Repair Set - Hot Air Blower:VAS 1978/14A is used together with the Wiring Harness Repair - Blower - Shrink Element:VAS 1978/15A to heat-shrink the crimp connectors. After crimping, crimp connections must be heat-shrunk using hot air gun to prevent moisture penetration.

The Wiring Harness Repair Set - Hot Air Blower:VAS 1978/14A is a component of the Wiring Harness Repair Set:VAS 1978 B and its previous versions.

Crimp connectors, heat-shrinking using the Wiring Harness Repair Set - Hot Air Blower:VAS 1978/14A . Refer to WIRE BREAK WITH SINGLE REPAIR POINT or Refer to WIRE BREAK WITH DUAL REPAIR POINT .