Name Badges And Emblems On Sides, Replacing: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
-- Follow the assembly instructions. Refer to NAME BADGES, REMOVING AND INSTALLING .
-- Remove the adhesive residue and clean the adhesive surface.
-- Allow the adhesive surfaces to dry for 10 minutes.
-- Align the emblem -1- to the edges of the fender -2- -arrow b and c-.
-- Align the emblem -3- to the edge of the door -4- -arrow a-.
-- Remove the protective film on adhesive tape -5- using the pulling aid.
-- Press the emblems firmly onto the components.