Assembly Instructions: Installing
Front Door Cover
-- Follow the assembly instructions. Refer to Assembly Instructions .
-- All grommets -8- and clips -4- must be checked for damage and replaced, if necessary.
-- Guide the cover -2- with the clips -4- into the grommets -8- and press on firmly.
-- Remove the protective film -5- from the adhesive tape -3-.
-- Push the cover on the door forcefully in the adhesive tape area -3-.
-- Tighten the bolts -7-.
Rear Door Cover
-- Follow the assembly instructions. Refer to Assembly Instructions .
-- All grommets -8- and clips -4- must be checked for damage and replaced, if necessary.
-- Guide the cover -1- with the clips -4- into the grommets -8- and press on firmly.
-- Remove the protective film -5- from the adhesive tape -3-.
-- Push the cover on the door forcefully in the adhesive tape area -3-.
-- Tighten the bolts -7-.