Assembly Instructions: Notes

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

The covers of the chrome trim moldings cannot be removed from the covers without damaging. There are different versions. Refer to the appropriate Electronic Parts Information for the allocation.
Pay attention that the adhesive surfaces are free of dust and grease and are dry.
The temperature from the vehicle, work station and component must be the same. The processing temperature is minimum 20 °C (68 °F) and maximum 35 °C (95 °F).
Clean the adhesive surface with cleaning solution and a lint-free cleaning cloth, and then let dry for 10 minutes.
Maintain the minimum curing time at processing temperature for 60 minutes.