Upper Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the cylinder 3 ignition coil. Refer to IGNITION COIL WITH POWER OUTPUT STAGE, REMOVING AND INSTALLING .

-- Free up the wiring harness on the clip -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the retainers in direction of -arrows-.

-- Pull the wiring duct -3- from the bracket.

-- Remove the bolts -2-.

-- Clamp off the coolant hoses using the Hose Clamps - Up To 25mm:3094 .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Place a cleaning cloth underneath, to catch cleaning coolant leaking out.

-- Loosen the clamps -arrows- and remove the coolant hoses.

-- Remove the bolts -1-.

-- Remove the upper coolant pipe.