Low Pressure Side Refrigerant Line Balance Weight, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Install the balance weight -2- to the specified dimension -a- 30± 5 mm on the refrigerant line-low pressure side -1-.
NOTE:
Make sure the balance weight -2- is seated securely on the refrigerant line and does not touch or come in contact with other components during operation.
The refrigerant line-low pressure side -1- must not be crushed by the additional weight -B-.