Right Vent Temperature Sensor -G151-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
-- Replace the seal -2- if it is damaged or faulty.
-- Connect the connector -3-.
-- Place the Right Vent Temperature Sensor -G151- -1- in the mount and turn it 90°.
NOTE:
An incorrectly installed vent temperature sensor causes flow-generated noise.
-- Check the DTC memory and erase any displayed entries. Refer to Vehicle Diagnostic Tester in the "Guided Fault Finding" function.