Belt Pulley, Removing And Installing, DENSO A/C Compressor: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the cap -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- by counterholding the belt pulley with an oil filter band wrench.

-- Remove the nut -2- and counterhold on the A/C compressor input shaft -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the drive plate -3- with the nut.

NOTE:

The drive plate threaded connection applies the tightening torque of the A/C compressor drive to the A/C compressor shaft.

-- Remove the circlip -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the belt pulley -1-.