Brake Caliper, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

The piston is pressed back.
Both brake pads and their springs rest in the openings in the brake carrier.

-- Place the brake caliper carefully on the brake carrier.

-- Counterhold at the guide pin and mount the brake caliper on the brake carrier with new self-locking bolts.

-- Attach the brake hose to the brake caliper.

-- Remove the Brake Pedal Actuator:VAG1869/2 .

-- Connect the brake pad wear indicator connector.

-- Bleed the brake system. Refer to HYDRAULIC SYSTEM, STANDARD BLEEDING .

-- Install the wheels.

CAUTION:

With the vehicle stationary, firmly press the brake pedal several times so that the brake pads in the operating condition properly sit in their respective position.

Check the brake fluid level.