Mounting Bracket, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Pay attention to correct seating of the connector -6- for the keyless access authorization system.
Pay attention to the correct seating of the support -3- for the mounting bracket.
For notes and procedures regarding a door handle with the keyless access authorization system, refer to Access/Start Authorization .
Cable, Securing
-- Pivot the retainer -5- slightly in direction of -arrow c-.
-- Push the cable pin -2- into the mount in direction of -arrow b-.
-- Guide the mounting bracket -1- into the door in direction of -arrow a-.
-- Tighten the bolt -4-.
Perform the rest of the installation in the reverse order of removal.