Pinch Protection Sensor -G673- AND Pinch Protection Sensor 2 -G753-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear lid trim panel. Refer to Luggage Compartment Trim Panels .
-- Disconnect the connectors -3- for the wire of the sensor strip -1-.
-- Remove the sensor strip -1- from the rear lid.
-- Remove the rubber grommet with the sensor strip -1- and wires from the rear lid -2-.