Release Cable Coupling With Release Cables, Removing And Installing, From 02/24/2020: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
-- Lock the release cable coupling -1- in the lock carrier.
-- Engage and clip the release cable -2- to the release cable coupling.
-- Engage and clip the release cables -4 and 6- to the latches -5 and 8-.
-- Guide the latches -5 and 8- into the lock carrier.
-- Install the new bolts -2-.
-- Connect the connector -10- for the contact switch.
-- Adjust the synchronous movement for the latches at the adjustment threads -9- in direction of -arrow D-.
-- Perform a function test before closing the hood.