Insulation, Removing And Installing, From 02/24/2020: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal.
-- Check the fasteners for damage and replace if necessary.
-- Slide the bottom tabs -4- into the hood mounts -1-.
-- Slide the left and right side tabs -3- into the hood mounts -1-.
-- Slide the top tabs -3- into the hood mounts -1-.
-- Engage all of the clips -5- into the hood.