Lock Carrier, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
-- Perform the service position using the Guide Pins:T10093 . Refer to SERVICE POSITION, SETTING AND RESETTING .
-- Disconnect the connectors present.
-- Drain the coolant and disconnect the coolant lines. Refer to COOLANT, DRAINING AND FILLING - 2.0L , COOLANT, DRAINING AND FILLING - 3.6L .
-- Support the hood and remove the support rod from the hood if equipped.
-- Together with a second technician, remove the Guide Pins:T10093 on the left and right longitudinal members and remove the lock carrier with the attachments -1-.
NOTE:
Never hang the condenser and the hydraulic fluid cooler on the lines.
The condenser and hydraulic lines must not be kinked.