Led Headlamps With Matrix-Beam, Adjusting

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Headlamp Adjusting Unit: VAS621 001
Vehicle Diagnostic Tester

NOTE:

Adjusting the headlamps is invoiced separately.

The PR number 8IV indicates that the vehicle is equipped with LED headlamps with matrix-beam.

-- Perform the basic setting of the headlamp range control in the control module >>C002 Software Cluster Embedded<< using the vehicle diagnostic tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the function button -1- in the main menu of the Headlamp Adjusting Unit: VAS621 001 .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Using the light selection buttons at the Headlamp Adjusting Unit: VAS621 001 select the menu >>low beams<<.

Left Headlamp, Adjusting

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Height adjustment
Lateral adjustment

-- Turn the height adjustment adjusting screw -1- until the correct setting is achieved.

-- Turn the lateral adjustment adjusting screw -2- until the correct setting is achieved. The side adjustment is sealed for SAE headlamps.