Sun Shade Drive Unit VX455, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

New Drive Unit

-- Install the new retainer.

Continuation for All Vehicles

-- Align the sunroof shade so that it is parallel before installing the drive unit.

-- Connect the connector -3- for the drive unit -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Conditions

• The retainer -2- must be seated correctly -arrows-.

-- Check the retainer -2-.

New drive unit

-- Refer to Roof System Control Module J1355, Programming  .

Continuation for All Vehicles