Overview - Sun Shade
- Side Frame Section
- Part of the frame with sun shade
- Refer to Frame with Sun Shade, Removing and Installing .
- Bolt
- 5.5 Nm
- Replace after removing
- Quantity: 4
- Bolt
- 5.5 Nm
- Replace after removing
- Quantity: 2
- Rear Frame
- Part of the frame with sun shade
- Refer to Frame with Sun Shade, Removing and Installing .
- Sun Shade
- Refer to Sun Shade, Removing and Installing .
- Gliding Piece
- Nut
- Replace after removing
- Tightening specifications and sequence Refer to Fig 1
- Quantity: 13
- Bolt
- 5.5 Nm
- Replace after removing
- Quantity: 4
- Sun Shade Cable
- Roof System Control Module -J1355-
- Connector
- Sun Shade Drive Unit -VX455-
- With Sun Shade Motor Position Sensor 1s -G1193-
- With Sun Shade Motor Position Sensor 2 -G1194-
- With Sun Shade Motor -V758-
- Refer to Sun Shade Drive Unit VX455, Removing and Installing .
- Shim
- Bolt
- 4 Nm
- Quantity: 3
- Front Frame Section
- Part of the frame with sun shade
- Refer to Frame with Sun Shade, Removing and Installing .
- Clip
- Quantity: 7
Tightening Specifications and Sequence
| Step | Nuts | Tightening Specification/Additional Turn |
|---|---|---|
| 1. | -arrows- | Install by hand |
| 2. | -1- | 8 Nm |
| 3. | -2- | 8 Nm |
| 4. | -3- | 8 Nm |
| 5. | -5- | 8 Nm |
| 6. | -6- | 8 Nm |
| 7. | -4- and -arrows- | 8 Nm |