LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Upholstery, Covers >> 74 Seat Upholstery, Covers >> Rear Seat Covers And Cushions >> Rear Seat Backrest Cover And Cushion, Removing And Installing >> Removing

Rear Seat Backrest Cover And Cushion, Removing And Installing: Removing

-- Remove the rear seat backrest. Refer to Rear Seat Backrest, Removing and Installing .

-- Remove the headrest. Refer to Headrest, Removing and Installing .

-- Remove the headrest guide. Refer to Headrest Guide, Removing and Installing .

-- Remove the locking mechanism trim. Refer to Locking Mechanism Trim, Removing and Installing .

-- Loosen the clip -2- from the cover -1- in the area of the inner mounting pin using a commercially available plastic wedge.

GWWN74-10369Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Left 1 /3 Rear Seat Backrest

-- Starting at the locking mechanism, pry the molding strip -1- out all the way around the backrest frame -3- in the direction of -arrow-.

GWWN74-000011Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the cover -2- from the cushion.

2 /3 Rear Seat Backrest without Pass-Through

-- Remove the rear seat belt guide. Refer to Rear Seat Belt Guide, Removing and Installing .

-- Starting at the locking mechanism, pry the molding strip -1- out all the way around the backrest frame -3- in the direction of -arrow-.

GWWN74-000012Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the cover -2- from the cushion.

2 /3 Rear Seat Backrest with Pass-Through

-- Remove the rear seat belt guide. Refer to Rear Seat Belt Guide, Removing and Installing .

-- Remove the pass-through door. Refer to Pass-Through Door, Removing and Installing .

-- Remove the pass-through cover frame. Refer to Pass-Through Cover Frame, Removing and Installing .

-- Starting at the locking mechanism, pry the molding strip -1- out all the way around the backrest frame -4- in the direction of -arrow-.

GWWN74-000013Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pry the molding strip -2- out all the way around the pass-through.

-- Remove the cover -3- from the cushion.

Continuation for All Vehicles