Rear Panel Trim Panel, Removing And Installing: Removing
-- Remove the headrest. Refer to Headrest, Removing and Installing .
-- Fold the rear seat backrest forward.
-- Release the hook in the direction of -arrow- using a commercially available plastic wedge -A- and pry the rear seat backrest child seat anchor -1- upward.
Tip
The entire surface of the rear panel trim panel is bonded with the backrest frame.
-- Warm all around the rear panel trim panel -1- using a Wiring Harness Repair Set - Hot Air Blower:VAS 1978/14A and carefully loosen it from the backrest frame -2-.