Pass-Through Cover Frame, Removing And Installing: Removing
-- Fold down the center armrest and open the pass-through door.
-- Release the hook -2- using the Trim Release Lever: T40207 -3-.
-- Unclip the door locking mechanism trim -1- in the direction of -arrow- using a commercially available plastic wedge.
-- Pry the pass-through cover frame -2- off the rear seat backrest -1- in the direction of -arrow A- using a Trim Release Lever: T10039 -3-.
-- Continue prying off starting at the upper left corner in direction of -arrow B-.
-- Remove the pass-through cover frame -2-.
-- Press the rear seat backrest cover and cushion to the side slightly and unclip the stop strip -1- in the direction of -arrow-.
-- Remove the stop strip -1-.