Outer Seat Trim Panel, Removing And Installing, Front Passenger Seat Without Height Adjustment: Removing
The removing and installing is described as an example for a LHD vehicle.
-- Position the front seat as far forward as possible.
-- Remove the backrest adjustment handle. Refer to BACKREST ADJUSTER, REMOVING AND INSTALLING .
-- Remove the bolt -2-.
-- Push the clamping pin in the expanding rivet -3- inward.
-- Pry out the expanding rivet -3- using a commercially available plastic wedge.
-- Loosen the mounting points -2-.
-- Remove the outer seat trim panel -1-.