Driver And Front Passenger Seat Lumbar Support Adjustment Switches E176/E177, Removing And Installing: Removing

The Driver Seat Lumbar Support Adjustment Switch - E176- and Front Passenger Seat Lumbar Support Adjustment Switch - E177- will be called the lumbar support adjustment switches in the information that follows.

The following information describes the removing and installing on the left side of the vehicle as an example.

-- Remove the seat trim panel on the outer side. Refer to OUTER SEAT TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the bolts -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector.

-- Remove the lumbar support adjustment switch -2-.