Overview - Underbody Trim Panels
- Front Underbody Panel
- Bolt
- 2 Nm
- Quantity: 9
- Clip
- Quantity: 4
- High-Voltage Battery Impact Guard
- Bolt
- Quantity: 35
- 8 Nm
- Replace after removing
- Nut
- 8 Nm +30°
- Replace after removing
- Quantity: 22
- Side Underbody Trim Panel/Side Impact Guard
- Depending on equipment/version
- Refer to Side Underbody Trim Panel, Removing and Installing, 82 KWH or Side Underbody Trim Panel, Removing and Installing, 55, 62 KWH .
- Bolt
- 2 Nm
- Quantity: 5
- Cover
- Left and right
- Refer to Center Underbody Trim Panel, Removing and Installing .
- Impact Guard
- Design depending on the model
- Refer to Impact Guard, Removing and Installing .
- Bolt
- 20 Nm
- Quantity depending on the model
- Quantity: 3 or 4
- Rear Underbody Trim Panel
- Design depending on the model
- Refer to Rear Underbody Trim Panel, Removing and Installing .
- Bolt
- 2 Nm
- Quantity depending on the model
- Quantity: 5 or 9
- Center Underbody Trim Panel
- Nut
- 2 Nm
- Quantity: 9
- Expanding Nut
- Quantity: 2
- Rear Center Underbody Trim Panel
- Clip
- Quantity: 3
- Bolt
- 8 Nm
- Quantity: 2
- Bolt
- 2 Nm
- Quantity: 5
- Side Underbody Trim Panel/Side Impact Guard
- Depending on equipment/version
- Refer to Side Underbody Trim Panel, Removing and Installing, 82 KWH or Side Underbody Trim Panel, Removing and Installing, 55, 62 KWH .
- Bolt
- 2 Nm
- Quantity: 5
- Bolt
- Refer to OVERVIEW - REMOVED HIGH-VOLTAGE BATTERY, 48, 55, 62 KWH .
- Quantity: 4