Towing Recognition Control Module J345, Removing And Installing: Removing

If the Towing Recognition Control Module Is Being Replaced, the Test Plan to Replace the Control Module Must Be Performed:

-- Perform the "Replace towing recognition control module" function using the Vehicle Diagnostic Tester . Refer to DIAGNOSTIC ENTRIES .

Continuation

-- Remove the luggage compartment left trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .

Towing Control Module with Screws

-- Remove the bolts -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Towing Control Module with Expanding Rivet

-- Remove expanding rivet -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Continuation for All Vehicles

-- Remove the towing recognition control module -1-.

-- Disconnect the connectors -3-.