Rear Lid, Removing And Installing: Removing
-- Remove the rear lid upper trim panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .
-- Disconnect the connectors -5-.
-- Release and remove the washer fluid hose -2-.
-- Guide the wires and washer fluid hose -2- with rubber grommet -4- out of the rear lid -1-.
-- Loosen the bolts -3-.
Conditions
- The help of a second technician is necessary for the following procedure.
Vehicles with Gas-Filled Strut
-- Remove the gas-filled struts. Refer to Gas-Filled Strut, Removing and Installing .
Vehicles with Rear Lid Motor 1 - V444- and Rear Lid Motor 2 - V445-
-- Remove the Rear Lid Motor 1 - V444- and Rear Lid Motor 2 - V445-. Refer to the appropriate Service Information .
Continuation for All Vehicles
-- Remove the bolts -2- and the rear lid -1-.