Rear Lid Drive Unit -VX69- / Rear Lid Drive Unit 2 -VX77-, Preparing For Disposal
CAUTION:
There is a risk of injury from the knife and plastic particles in the air. Eye irritation or injury could occur.
- Wear protective eyewear.
- Wear safety gloves.
-- Cut open and then remove the protective cover -3- using a sharp cutter -arrow-.
-- Clamp the drive unit with the engine-side -1- into a commercially available vise.
CAUTION:
Risk of eye injury due to flying shavings. Eye irritation and injury is possible.
- Wear protective eyewear.
- Wear safety gloves.
Conditions
- The dimension -a- = 100 mm must be maintained.
-- Separate the spring wire at the distance -a- from the engine-side using a commercially available metal saw.
-- Turn the drive unit -1- and spring half -2- toward one another to release the tension in the spring.