Hinge, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

New Hinge

-- Use a new seal.

Continuation for All Vehicles

-- Tighten the nuts -1 and 3-.

Fig 1: Rear Lid Hinge

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the nut -3-.

-- Tighten the nut -3- until the seal -2- is seated correctly.

-- Apply corrosion protection to the nuts and bolts.

Follow the instructions in the Paint repair information. Refer to the appropriate service information.

-- Refer to Rear Lid, Adjusting  .