Charge Door Unit, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

-- Insert the water drain hose -2- in the direction of -arrow A- through the opening in the charging port door unit -1- and pull it through until it stops.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the water drain hose -2- in the direction of -arrow B- in the side panel -3-.

CAUTION:

There is a risk of damage from pivoting the charging door unit inward.

Paint damage possible.

- Fold in the charging door unit.

-- Pivot the charge door unit -1- in the direction of -arrow C- in the side panel -3-. At the same time the fold down the charge door unit to that it does not contact the side panel -3-.

-- Connect the connectors.

-- Push the charge door unit -1- in the direction of -arrow D- in the side panel until the catch engages.

-- Perform a function test with the charging door unit open.