Bumper Cover, Removing And Installing: Removing

-- Loosen the front wheel arch trim in the area of the bumper cover. Refer to the appropriate Service Information .

-- Loosen the front wheel housing liner in the area of the bumper cover. Refer to Front Wheel Housing Liner, Removing and Installing .

-- Remove the bolts -2 and 3- on both sides of the vehicle.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -2- on both sides of the vehicle.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Conditions

• The help of a second technician is necessary for the following procedure.

-- Unclip the bumper cover -1- in the direction of -arrow A- and hold it.

-- Remove the bumper cover -1- in the direction of -arrow B-.

-- Disconnect the connectors.