Rear Parking Aid Sensors G203/G204/G205/G206, Removing And Installing: Removing
Exterior Sensors:
-- Press the hook in the -direction of the arrow- and at the same time press the sensor -1- from the outside to the inside.
-- Disconnect the connector -2- and remove it straight off the parallel sensor -1-.
-- Remove the sensor -1-.
Interior Sensors:
-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Press the hook in the -direction of the arrow- and at the same time press the sensor -1- from the outside to the inside.
-- Disconnect the connector -2- and remove it straight off the parallel sensor -1-.
-- Remove the sensor -1-.
Continuation for all vehicles