Fuse Panel A SA, Removing And Installing: Removing

-- Remove the brace. Refer to the appropriate Service Information .

-- Disconnect the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Release the hooks -arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the cover -1-.

CAUTION:

Risk of interchanging the connector assignment.

- Use the exact connector assignment of the wires from the applicable wiring diagram.

- Take photos of the assignment.

-- Mark the wires -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the nuts from the wires -2-.

-- Remove the wires -2-.

-- Remove the cable tie at the fuse panel bracket -3-.

-- Remove the positive cable -4- nut.

-- Remove the positive cable -4-.

-- Release the tabs -1- in the -direction of arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the fuse panel with the bracket -1-.

-- Release the hook -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the fuse panel -3- in -direction of the arrow- from the bracket -2-.