Overview - Underbody Trim Panels
- Front Underbody Panel
- High-Voltage Battery Impact Guard
- Side Underbody Trim Panel/Side Impact Guard
- Depending on equipment/version
- Refer to Side Underbody Trim Panel, Removing and Installing, 82 KWH or Side Underbody Trim Panel, Removing and Installing, 55, 62 KWH .
- Rear Sill Panel Reinforcement/Impact Guard Support
- Depending on equipment/version
- Refer to Side Underbody Trim Panel, Removing and Installing, 82 KWH or Side Underbody Trim Panel, Removing and Installing, 55, 62 KWH .
- Cover
- Impact Guard
- Refer to Impact Guard, Removing and Installing .
- Bolt
- 20 Nm
- Quantity: 3
- Rear Underbody Trim Panel
- Bolt
- 2 Nm
- Quantity: 9
- Rear Motor Underbody Protection
- Bolt
- 8 Nm
- Quantity: 2
- Clip
- Quantity: 3
- Bolt
- 20 Nm
- Quantity: 4
- Spring Nut
- Quantity: 4
- Bolt
- 2 Nm
- Quantity: 4
- Impact Guard for Motor Underbody Protection
- Nut
- 8 Nm +30°
- Replace after removing
- Quantity: 34
- Bolt
- 8 Nm
- Replace after removing
- Quantity: 39
- Bolt
- 2 Nm
- Quantity: 4
- Bolt
- 2 Nm
- Quantity: 10
- Clip
- Quantity: 4
- Bolt
- 2 Nm
- Quantity: 9