LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2022 >> Passat R-Line >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger, Supercharger [DDSB,DDSA] >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor -G31-, Removing And Installing >> Removing

Charge Air Pressure Sensor -G31-, Removing And Installing: Removing

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Disconnect the connector -2-.

Fig 1: Identifying Charge Air Pressure Sensor
GWWM21-10014Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and pull the Charge Air Pressure Sensor -G31- -1- out of the air duct pipe and remove it upward.

NOTE:

The bolts are each accessible in front of and behind the coolant hose from above.