Overview - Turbocharger, Part II

Fig 1: Exploded View Of Turbocharger (Part II)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Bolt
   • 9 Nm
2. Oil Return Line
3. O-Ring
   • Replace after removing
   • Coat with engine oil
4. Bolt
   • 10 Nm
5. Charge Air Pressure Actuator -V465-
6. Nut
   • 10 Nm
   • Secure with Mini Torque Wrench :VAS6854 
7. Bolt
   • 9 Nm
8. Connection
9. O-Ring
   • Replace after removing
10. Bolt
    • 9 Nm
11. Turbocharger Recirculation Valve -N249-
    • Note the installation position. Refer to Fig 2.
    • Removing and Installing. Refer to Turbocharger Recirculating Valve -N249-, REMOVING AND INSTALLING .
12. O-Ring
    • Replace after removing
13. Turbocharger
    • Removing and Installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
14. O-Ring
    • Replace after removing
    • Coat with coolant
15. Bolt
    • 9 Nm
16. Bolt
    • 9 Nm
17. Bolt
    • 9 Nm
18. Coolant Return Line
19. O-Ring
    • Replace after removing
    • Coat with coolant
20. O-Ring
    • Replace after removing
    • Coat with engine oil
21. Bolt
    • 30 Nm
    • Coat the thread with hot bolt paste. Refer to the appropriate service information. .
22. Bracket
    • For the turbocharger
23. Bolt
    • 30 Nm
24. Bolt
    • 9 Nm

Fig 2: Turbocharger Recirculation Valve -N249- Installation Position

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Note the installation location -arrows-.