LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta SEL >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Exterior Body Panels (Hood, Lids) (Service Information) JETTA) >> (55 Hood, Lids) >> Rear Lid >> Gas-Filled Strut, Removing And Installing >> Notes

Gas-Filled Strut, Removing And Installing: Notes

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Proceed carefully when reusing a gas-filled strut. Do not pry the spring clip completely out of the ball socket, otherwise the spring clip will be damaged. The gas-filled strut will spring out of the mount, resulting in damage or injury to the technician.

scientia non olet · About LEMON Manuals