LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta SEL >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Exterior Body Panels (Hood, Lids) (Service Information) JETTA) >> (55 Hood, Lids) >> Hood >> Hinges, Removing And Installing >> Installing

Hinges, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Install the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .

-- Install the hood -1-. Refer to HOOD, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals