Drive Plate, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
-- Secure the :VW558
to the drive plate with the M8 x 45 hex bolt. To do this, insert two M10 hex nuts between flywheel lock adapter and drive plate.
 Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
|
Installed location of flywheel retainer:
A - To loosen
B - To tighten
-- Remove the bolts from the drive plate.