LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta SEL >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Engine System (Cylinder Head & VALVETRAIN System - Service Information - 1.8L; 2.0L TFSI - CPLA, CPPA, CPKA, CPRA)) >> 15 Cylinder Head, VALVETRAIN >> Intake And Exhaust Valves >> Valve Guides, Checking >> Wear Limit

Wear Limit

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Intake Valve Guide Exhaust Valve Guide
0.80 mm 0.80 mm
NOTE:

If the wear limit is exceeded, measure using new valves. Replace the cylinder head if the wear limit is still exceeded.

If the valve was replaced during a repair, a new valve must be used to measure.

scientia non olet · About LEMON Manuals