LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta SEL >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Engine System (Cylinder Head & VALVETRAIN System - Service Information - 1.8L; 2.0L TFSI - CPLA, CPPA, CPKA, CPRA)) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Overview - Cylinder Head >> Cylinder Head Tightening And Loosening Specifications

Cylinder Head Tightening And Loosening Specifications

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cylinder Head Loosening Sequence
GWWA15-11209Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows-.

-- Loosen the cylinder head bolts in order from -1 to 10-.

Fig 2: Cylinder Head Tightening Sequence
GWWA15-11210Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the cylinder head bolts in sequence -1 to 10- and -arrows-.

Step Bolts Tightening Specification/Additional Turn
1. -1- through -10- 40 Nm
2. -1- through -10- Turn an additional 90°.
3. -1- through -10- Turn an additional 90°.
4. Bolts -arrows- 4 Nm
5. Bolts -arrows- Turn an additional 90°.
scientia non olet · About LEMON Manuals