Coolant, Extracting

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

To extract the coolant use the extraction adapter -item ) Extraction Adapter-.

-- Remove the suction hose -5- from the reservoir -2-.

-- Attach the extraction adapter -12- on the connector coupling from the suction hose -5-.

-- Switch on the pump -7- and open the shut-off valves -A and B- on the valve block -8-.

-- Extract the excess coolant using the extraction adapter -12-.

-- Connect the shut-off valves on the valve block and switch off the pump.