LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta SEL >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Cooling System (General & Service Information - CVCA, CUUA, CUUB, DELA, DEBA, DEJA, DGMA)) >> 19 Cooling System >> Coolant Pump/Coolant Regulation >> Cylinder Head Coolant Valve -N489-, REMOVING AND INSTALLING >> Installing

Cylinder Head Coolant Valve -N489-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

Replace the O-rings after removing them.

-- Install the upper toothed belt guard. Refer to TOOTHED BELT GUARD, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals