Charge Air Pressure Actuator -V465-, REMOVING AND INSTALLING, VERSION 1: Removing

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the bolts -arrows-.

Fig 1: Drive Axle Heat Sheild

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the right drive axle heat shield.

-- Disconnect the connector -1-.

Fig 2: Identifying Charge Pressure Actuator

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the lock washer -2- using the : T40265  .

-- Remove the bolts -arrows- and then the Charge Air Pressure Actuator -V465-.