Mass Airflow Sensor -G70-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Remove the air duct pipe with connection from the turbocharger. Refer to TURBOCHARGER CONNECTIONS, REMOVING AND INSTALLING .
-- Remove the bolt -1-.
-- Turn the Mass Airflow Sensor -G70- -2- in the direction of -arrow B- and remove.