Fuel Temperature Sensor -G81-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Replace the seal -3-.
-- Make sure the seal -2- is seated correctly.
-- Install the Fuel Temperature Sensor -G81- -1- in the adapter -4-.
-- Perform a leak test on the fuel system. Refer to FUEL SYSTEM LEAK TEST .
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .