LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Diesel Fuel Injection System (General & Service Information - CVCA, CUUA, CUUB, DELA, DEBA, DEJA, DGMA)) >> 23 Diesel Fuel Injection >> Engine Control Module >> Engine Control Module -J623-, REMOVING AND INSTALLING >> Engine Control Module -J623-, REMOVING AND INSTALLING >> Removing

Engine Control Module -J623-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Switch off the ignition.

-- Remove the E-box cover inside the engine compartment -arrows-.

GWWM24-10006Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unlock and disconnect the connector from the engine control module.

-- Push the tabs on the side guides -3- carefully toward the outside with a screwdriver -2-.

GWWM24-10008Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the engine control module -1- upward from the side guides -3-.