Overview - Hinge
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Rear Lid
- Removing and Installing. Refer to REAR LID, REMOVING AND INSTALLING .
- Adjusting. Refer to REAR LID, ADJUSTING .
- Bolts
- 9 Nm
- Quantity: 2 per hinge
- Hinge
- If equipped: Hinge Cover, Removing and Installing. Refer to HINGES, REMOVING AND INSTALLING .
- Removing and Installing. Refer to HINGES, REMOVING AND INSTALLING .
- Gas-Filled Strut
- Removing and Installing. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
- Venting. Refer to GAS-FILLED STRUT, VENTING .
- Wire
- Clipped to the hinge
- Bolt
- 9 Nm
- Quantity: 4 on each hinge
- Spring
- Left and right
- Engaged in the left hole -arrow-