Gas-Filled Strut, Removing And Installing: Installing
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- The spring clips -2- are pushed over the ball sockets in the gas-filled strut -1-.
-- Push the gas-filled strut ball socket -1- onto the ball stud until the ball socket clicks into place on the ball stud.