LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Exterior Body Panels (Hood, Lids) (Service Information) JETTA) >> (55 Hood, Lids) >> Hood >> Support Rod, Removing And Installing >> Installing

Support Rod, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Check the retainer -3- for damage. Replace it if necessary.

-- Install the support rod -1- into the rubber grommet -2- -arrow a-.

-- Move the support rod -1- back to the lock carrier -arrow b-.

scientia non olet · About LEMON Manuals