Release Cable, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
-- Open the hood.
-- Remove the cover for the release cable coupling -2- above the headlamp on the driver side from the lock carrier.
-- Remove the cover -2- from the release cables -1- and -3- -a arrows-.
-- Move the release cable -1- 90° -arrow b- and then remove the release cable -1- from its mount -3- in the direction of the -arrow c-.